Connector Test Equipment Overview
Specialized equipment designed to measure moisture loss values in inline connectors during operational use, ensuring product reliability and performance standards.
Equipment Control and Operation
Control Functions
Power Off/On: Controls main equipment power supply
Emergency Stop: Immediately halts all equipment operations in emergency situations
Test Operation Procedure
- Activate power switch (Off/On) to access system login interface
- Select system entry to reach main operation page
Breathing System Configuration
Breathing Settings
| Function |
Description |
| Tidal Volume Selection |
Set tidal volume parameter - breathing frequency automatically adjusts once volume is confirmed |
| Homing Function |
Return to origin position - testing should always initiate from origin point |
| Breathe Start/Stop |
Control breathing cycle initiation and termination |
Breathing Time Management
| Control |
Function |
| Timing Switch |
Activate timer - heating and breathing automatically cease when timing completes |
| Time SV |
Set breathing duration parameters |
| Time PV |
Display current breathing time progress |
Flow Monitoring System
Total Exhalation Volume (V): Cumulative breathing volume automatically calculated from set tidal volume and breathing duration. For accurate results, set breathing time first, then configure tidal volume.
Heating System Controls
Temperature Regulation
| Control |
Function |
| Heating Switch |
Activate heating system functionality |
| Sink Temperature: SV |
Set water tank heating temperature parameters |
| Sink Temperature: PV |
Display current water tank temperature readings |
| Box Temperature: SV |
Set chamber heating temperature parameters |
| Box Temperature: PV |
Display current chamber temperature readings |
Temperature Monitoring
Real-time temperature curve display showing one-hour historical data with color-coded differentiation between water tank and chamber temperatures.
Weighing and Measurement System
Weighing Controls
| Function |
Description |
| Current Weight |
Real-time weight measurement display |
| Zero/Tare |
Tare functionality - perform tare operation before weighing to ensure measurement accuracy |
| Weight |
Weighing activation - click to initiate weighing, click again to cancel |
| Records Delete |
Clear recorded weight data - erases stored m0, m1, m2 values |
| Record |
Weight recording function |
Weight Recording Protocol
- m0: Record pre-test baseline weight measurement
- m1, m2: Record post-test weight measurements for comparison
Moisture Loss Rate Calculation
Automated calculation system determines moisture loss rate using recorded weights (m0, m1, m2) and cumulative volume (V). Manual input capability available for customized calculations and verification.
